Colex T00494,Colex T00494 Bit,Colex Upcut Router Bit,Colex Router Bit,Colex Sharpcut Flatbed Cutter,Colex Flatbed Cutter

Product Categories

Colex T00494 Upcut Router Bit For Colex Sharpcut Flatbed Cutter

Colex T00494 Upcut Router Bit is a precision CNC cutting tool designed for use with Colex Sharpcut flatbed cutters. This single-flute upcut bit is specifically optimized for high-speed chip evacuation and is primarily recommended for machining both soft and hard plastics. Enquire now

Description

Colex T00494 Upcut Router Bit

Bit Type:
Upcut, 1 Flute
Cut Diameter:
1.5mm/ .059″ – approx. 1/16″
Cut Length:
6mm / 0.236″ – approx. 1/4″
Shank Diameter:
1/8″

Recommended Use:
Key Features and Usage
Material Compatibility:
While specifically recommended for plastics, upcut spiral bits are generally favored for their ability to pull chips upward toward the router motor, which helps clear debris from the cut path and prevents clogging.

Precision Cutting:
The small 1.5mm diameter makes it suitable for fine detail work and tight radii that larger bits cannot achieve.
Plunge Capabilities: Like most spiral bits, the T00494 is effective for plunge cuts because its geometry allows it to drill into material more easily than standard straight-flute bits.