1.Cutting Angle and Application:
- SPB-0001: This blade has a 30° cutting angle, making it suitable for precise cuts on thin materials like standard adhesive-backed sheet vinyl. It requires higher cutting pressure compared to SPB-0030.
- SPB-0030: This blade also has a cutting angle, but it is typically used for standard vinyl cutting with a 45° angle, which is not explicitly mentioned in the search results. However, it is noted for being the standard blade for cutting adhesive-backed sheet vinyl with lower cutting pressure requirements than SPB-0001.
2. Offset Value:
- Both blades have an offset value of 0.3mm. This means they are designed to maintain a consistent cutting path relative to the plotter's movement.
3. Material Compatibility:
- Both blades are suitable for cutting adhesive-backed sheet vinyl. However, SPB-0001 is noted for requiring higher pressure, which might be beneficial for slightly thicker or more resistant materials.
4. Machine Compatibility:
- Both blades are compatible with various Mimaki plotter models, including the CG series.
In summary, while both blades are used for similar applications, the SPB-0001 is more precise and requires higher pressure, making it suitable for thinner materials or more detailed cuts, whereas the SPB-0030 is a standard choice for general vinyl cutting with lower pressure requirements.
SHARE：
PREV : How does the Mimaki SPB-0030 blade compare to the SPB-0043 blade NEXT : Choose And Use Mimaki Spb-0001 Spb-0003 Spb-0005 Spb-0006 Spb-0007 Spb-0030 Knife Blade
