1. Press 'Change Tool' in Axis Control.

2. Make sure the screw is loosend.

3. Always install the drag module in slot one. Make sure the pins are correctly set when you push down the module and that the connector lowers deep enough. 

4. Fasten the screw and press 'Online' in Axis Control'.

SHARE：         

PREV : ZUND Z61 MultiCam 003612-MC61 Blackman & White BW61 iEcho E61 Oscillating Knife Blades Stores Shops NEXT : Noże do ploterów tnących Summa 391-358 391-360 390-550 391-231 390-534