Part number

Linked OEM / Kstyle

Shank / overall length

Tip / angle (if given)

Typical materials / notes

Example holder / notes

003612-MC-ECO50

MultiCam ECO / K1 roundshank oscillating knife

Round shank (6 mm series), used in standard MultiCam oscillating head

Generalpurpose oscillating blade (angle not specified)

General oscillating cutting of lightweight board, films, soft materials where a basic ECO/K1 blade is specified

Use where the machine/tools list “ECO50 / K1” as the blade; good starter choice for light packaging and display work.

003612-MC6303

Also sold as BT57253P, Kstyle oscillating blade

Round shank, MultiCam oscillating; height published as “knife height” (6 mm family)

Angle listed as about 86.5° on blade charts

For cardboard, corrugated, foam board and similar packaging materials; general oscillating work but a bit steeper angle than standard carton knives.

Use in oscillating holder for mediumthick carton and corrugated where a slightly steeper, more durable edge is desired.

84-00193-BT-57275 / MultiCam K2

OEM K2 roundshank blade; often crossref’d to MultiCam and AXYZ

Cut length 6 mm, shank 6 mm, overall length 36 mm, round shank

Doubleedge, round point with tip at center of rotation

Corrugated boards, soft plastics, soft foams, folding carton, rubber (general K2 oscillating blade)

Used with MultiCam KH6/K2 oscillating holder; good allrounder for corrugated and foam up to moderate thickness.

003612-MC7354

OEM 84-00193-BT57268; listed as flatpoint doubleedge K10 oscillating blade

Carbide blade, round shank (MultiCam oscillating series)

K10, flat point, double edge; designed for oscillating use

Cardboard, corrugated board and similar sheet materials where a flat point reduces overpenetration and tip damage

Good choice when you want a robust flatpoint oscillating blade for packaging board on MultiCam or compatible systems.

003612-MC7267

OEM 84-00193-BT-57267; Kstyle oscillating blade similar to Aristo 7267

Round shank Ø6 mm, overall length about 36 mm; cutting edge width about 4.8 mm

Oscillating roundedtip blade, about 12° edge geometry (per Aristoequivalent description)

Cork, foam board, gaskets, corrugated and other mediumthick soft materials up to around 10–13 mm

Max cutting depth about 10 mm on MultiCam listing; used in KH6/Kseries oscillating holders for thicker soft materials.

003612-MC7265

OEM 84-00193-BT-57265; often crossref’d to Aristo 7265, Kuris 73357

Round shank Ø6 mm, overall length 36 mm; max cutting depth about 15 mm

K6style oscillating blade; tip and angle optimized for deeper cuts (exact angle not always listed)

Deep cutting in foams, rubber and thicker flexible materials up to about 15 mm, also used for dense corrugated

Used with KH6 / K6 oscillating holder; goto choice when you need more depth than MC7267 while staying in the 6 mm system.

003612-MC142568

OEM 84-00193-BT57235; listed as K96 vibrating/oscillating blade

Round shank Ø6 mm; MultiCam CNC knife system

Tungstencarbide vibrating blade, angle about 83.5° in supplier specs (K96 style)

General K96 flatpoint knife for corrugated boards, foams, plastics and rubber on MultiCam CNC systems

Use when your tool list specifies K96 or BT-57235; good durable carbide option for production cutting.

003612-MC142022

OEM 84-00193-BT57220; K90  style roundshank knife

Round shank Ø6 mm blade, height typically for materials up to about 18 mm in Fseries crossrefs

K90, pointed knife, equivalent to Summa 500-9830 and AXYZ B1031L20

For thicker materials (e.g., foams, corrugated up to roughly 18 mm) that benefit from a sharper K90 tip rather than a flat point

Often used in oscillating or drag configurations where a K90 style is specified; good when you need penetration in thicker stackups.

003612-MC140396

OEM oscillating K98 blade, round shank shaft

Round shank oscillating blade (6 mm series), sold as “Round Shank Shaft Oscillation Knife Blades K98”

K98 style; sharper, more acute geometry than K96; detailed angle not always given

For tougher or thicker materials where a more aggressive K98 edge is preferred over K96, including dense corrugated and foam/rubber.

Compatible with the same MultiCam oscillating holders as other 6 mm Kseries blades; pairs with MC140394 as a related variant.

003612-MC140394

OEM 84-00193-BT57269; K8 oscillation knife blade

Round shank oscillating knife blade (6 mm family)

K8 style; somewhat less steep than K98; detailed angle not always given

General K8 oscillating use in corrugated and foam where you want a balance between penetration and durability.

Used in MultiCam oscillating heads; a common alternative to K96/K98 when the cut depth and edge life requirements are moderate.